Unify OpenScape IP 35G SIP User Manual

Enhanced phone functions 77
Enhanced phone functions
Incoming calls
Deflecting a call
Using call deflection
Prerequisite: An incoming call is displayed or signalled. "Deflect" must be al-
lowed.
Select and confirm the option shown.
If a destination phone number is stored ( Page 77), you can select and confirm
it. The call is deflected.
or If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j Enter and confirm the destination phone number. The call is deflected.
Permitting call deflection
z
You can also configure this setting via the WBM interface  Page 198. "Deflect"
must be authorised by administrator.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm.
Select and confirm the option shown.
j Enter and confirm the phone number to which the station should be deflected.
Deflect? m
089008844 l
Settings
User
Configuration
Incoming calls
Deflecting?
Allow deflection = No f
Yes l
Default destination = f

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English