Unify OpenScape IP 35G SIP User Manual

196 Diagnostic information
Diagnostic information
This information overview in the user area of the service menu provides you with
information on the current configuration of the telephone:
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
You see a numbered list of telephone parameters with the current settings.
You can see a more structured view of the list via the WBM interface
 Page 198:
Example:
Settings
User
Diagnostic information
Diagnostic.information
2011-05-23 12:24:00
00 terminal.number: 3334
01 sip.server: 192.168.1.240
02 sip.port: 5060
03 sip.registrar: 192.168.1.240
04 sip.registrar.port: 5060
05 sip.gateway: 192.168.1.240
06 sip.transport: UDP
07 sip.gateway.port: 5060
08 server.features: Nein
09 dns.results: 5060
10 multiline: Nein
11 registered.lines: 5060
12 backup.active: Ja
13 backup.proxy:
14 software.version: V3 R0.24.0 SIP 110514
15 display.message: None
16 last.restart: 2011-05-19T13:42:02
17 memory.free: 23131K free
18 ip.adress: 192.168.1.203
19 subnet.mask: 255.255.255.0
20 default.route: 192.168.1.2
21 primary.dns: 192.168.1.105
22 secondary.dns: 192.168.1.2
23 route.1.ip:
24 route.1.gateway: None

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English