Unify OpenScape IP 35G SIP User Manual

Call forwarding 61
Uncond’l: 3339 (deactivated is the default setting)
Busy: 3335
No reply ({1}s): 3336
and confirm your selection. Here for example Uncond’l.
Select and confirm the option shown. Call forwarding is activated. This type of
call forwarding is deactivated with Turn off.
Call forwarding settings can appear as follows:
Uncond’l: 3339 (default setting is off)
Busy: 3335
No reply ({1}s): 3336
Settings Press the illuminated key to open the call display. If Unconditional was activated,
the forwarding destination is displayed with the forwarding icon and the Forward
key illuminates. The Busy and No reply types of call forwarding are not dis
-
played.
Defining the ring duration before call forwarding on no
reply
You can define how often the phone should ring before the "No reply" call for-
warding is activated.
z
You can also configure this setting via the WBM interface  Page 198.
Forward Press the key shown.
Within three seconds:
Select and confirm the option shown.
Select and confirm the type of call forwarding.
Select and confirm the option shown.
j Enter the desired time in seconds and confirm your entry. The set time is dis-
played with the option. Call forwarding is activated.
Settings Press the illuminated key to open the call view.
Turn on: l
This setting is only available if the "Server features" function was deacti-
vated by the administrator.
Edit call forwarding f
 No reply ({1}s): 3335 f
Set delay m

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English