– Install seat rails in such a way that notch -1- in seat rail points
in direction of normal travel.
Riveted cover of long seat rail
Note
♦
If the cover -1- was removed with the seat rail in situ, make
sure that any swarf from drilling is removed completely to pre‐
vent corrosion damage to the seat rail and vehicle floor.
♦
Use pop rivet pliers - VAS 5072A- to fit new pop rivets -2-.
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
104 Rep. gr.68 - Interior equipment