– Unclip catches of caps -2- and -3- from belt guide -1- and re‐
move caps.
– Unscrew bolts -4- and -5- of belt guide -1-.
– Pull belt guide -3- off head restraint adjuster -2-.
– Pull head restraint -1- out of head restraint adjuster -2-.
Installing
Install in reverse order of removal, observing the following:
– Before installing, check all fasteners for damage and renew as
necessary.
Specified torques
Component Specified torque
Bolt for belt guide 8.0 Nm
4.6 Removing and installing trim for head
restraint adjuster
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
408 Rep. gr.72 - Seat frames
To Next Page
Loading...
Need help?
General