– Pull out step insert -1-.
Installing
Install in reverse order of removal, observing the following:
Note
♦
Before installing, check retaining clips -2- for damage and re‐
new if necessary.
♦
After installing, ensure door seals are seated correctly.
5.2 Removing and installing A-pillar trim
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1783-
♦ Wedges - T10383-
Note
Removal and installation is described for the front passenger side.
Follow same instructions for the driver side as appropriate.
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
5. Interior trims 229
To Next Page
Loading...
Need help?
General