6.5 Removing and installing luggage com‐
partment side trim
⇒ “6.5.1 Removing and installing luggage compartment side trim,
Multivan, rear, side of vehicle with sliding door”, page 259
⇒ “6.5.2 Removing and installing luggage compartment side trim,
Multivan, rear, side of vehicle without sliding door”, page 260
⇒ “6.5.3 Removing and installing luggage compartment side trim,
Transporter, rear, side of vehicle with sliding door”, page 262
⇒ “6.5.4 Removing and installing luggage compartment side trim,
Transporter, rear, hardboard-type trim”, page 263
6.5.1 Removing and installing luggage com‐
partment side trim, Multivan, rear, side
of vehicle with sliding door
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1783-
Note
The removal and installation procedures may have to be modified
slightly depending on model variants.
Removing
– Switch off ignition.
– Remove 3rd seat row ⇒ page 364 .
– Remove upper C-pillar trim ⇒ page 237 .
– Remove D-pillar trim ⇒ page 240 .
– Remove lock carrier trim ⇒ page 266 .
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
6. Luggage compartment trims 259
To Next Page
Need help?
General