Removing
– Using wedge - T10039/1- and starting at position -2-, unclip
trim panel -1- in -direction of arrow- from catches.
Installing
– Fit trim panel in installation position, and press it on until catch‐
es can be heard to engage.
3.5 Removing and installing dash panel in‐
sert trim
Special tools and workshop equipment required
♦ Front end hook - 3370-
Removing
– Remove mounting frame for radio/navigation system
⇒ page 205 .
– Remove gap cover on dash panel insert ⇒ page 29 .
– Remove dash panel vent on driver side ⇒ page 213 .
– Using front end hook - 3370- , unclip trim -1- in
-direction of arrow- on both sides.
Installing
– Fit dash panel insert trim in installation position, and press it
on until catches can be heard to engage.
3.6 Removing and installing loudspeaker
trim
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
3. Dash panel 203