– Disconnect cable ties from wiring harnesses -arrows-.
– Detach connector -2- from seat adjustment control unit.
– Detach connector -3- from seat adjustment control element
-1-.
Installing
Install in reverse order of removal, observing the following:
– Before installing, check all fasteners for damage and renew as
necessary.
4.13 Removing and installing control element
bracket
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
424 Rep. gr.72 - Seat frames
To Next Page
Loading...
Need help?
General