4 Front centre armrest
⇒ “4.1 Removing and installing front centre armrest”, page 66
4.1 Removing and installing front centre armrest
Removing
– Lever off cover cap -1- using a small screwdriver.
– Unscrew bolt -2-.
Note
♦
The bolt -2- is microencapsulated and must be renewed each time it is loosened.
♦
Before a new bolt is installed, the thread of the corresponding nut must be cleaned.
– Remove arm rest -3- from seat.
Installing
Install in reverse order of removal, observing the following:
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
66 Rep. gr.68 - Interior equipment
To Next Page
Loading...
Need help?
General