♦ Release lever - T10039-
Removing
– Remove loudspeaker trim ⇒ page 203 .
– Unscrew bolts -2- from loudspeaker mounting -1-.
– Using wedge - T10039/1- , carefully unclip loudspeaker
mounting -1- in -direction of arrow- from catches.
– Separate electrical connector on loudspeaker.
Installing
Install in reverse order of removal, observing the following:
Specified torques
Component Specified torque
Bolts for loudspeaker mounting 1.5 Nm
3.12 Removing and installing cup holder
Removing
– Reach into cup holder from above and turn slightly in direction
of -arrow-.
– Remove cup holder upwards from dash panel.
Installing
Installation is carried out in reverse order.
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
212 Rep. gr.70 - Trim, insulation