Removing
– Fold down grab handles -1-.
– Lever off cover caps using a small screwdriver.
– Fold up caps, and lock grab handles -1- in place.
– Unscrew bolts -2-.
– Remove grab handles -1-.
Installing
Install in reverse order of removal, observing the following:
Specified torques
Component Specified torque
Bolt for grab handle 2 Nm
2.8 Removing and installing grab handles
on pillar trims
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
2. Equipment 51
To Next Page
Loading...
Need help?
General