♦ Release lever - T10039-
Removing
– Remove mounting frame for radio/navigation system
⇒ page 205 .
– Remove trim panels on right and left next to mounting frame
of operating unit of heater and air conditioning unit
⇒ page 200 .
– Using release lever - T10039/1- , unclip mounting frame of
operating unit of heater and air conditioning unit -1- in
-direction of arrow-.
– Disconnect connectors on switches installed in mounting
frame.
Installing
– Fit heater/air conditioner operating unit installation frame in
installation position and press it on until catches can be heard
to engage.
3.10 Removing and installing dash panel
Special tools and workshop equipment required
♦ Torque screwdriver - V.A.G 1624-
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
206 Rep. gr.70 - Trim, insulation
To Next Page
Loading...
Need help?
General