Volkswagen Transporter 2016 User Manual

Note
♦ Before installing, check all fasteners -2- for damage and renew
if necessary.
♦ Remove any clips left in bodywork mountings using removal
tool - T40280- and fit them in trim for installation.
♦ Following installation, ensure that trim is positioned in door
seal beading.
Specified torques
Component Specified torque
Bolts for handle 6 Nm
5.3 Removing and installing B-pillar trim
⇒ “5.3.1 Removing and installing B-pillar trim, Multivan, top”, page
231
⇒ “5.3.2 Removing and installing B-pillar trim, Multivan, bottom”,
page 232
⇒ “5.3.3 Removing and installing B-pillar trim, Transporter, top”,
page 234
⇒ “5.3.4 Removing and installing B-pillar trim, Transporter, bot‐
tom”, page 236
5.3.1 Removing and installing B-pillar trim,
Multivan, top
Special tools and workshop equipment required
♦ Release lever - T10039-
♦ Wedges - T10383-
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
5. Interior trims 231

Volkswagen Transporter 2016 Specifications

General

Brand	Volkswagen
Model	Transporter 2016
Category	Heater
Language	English