Removing
Note
The removal and installation procedures may have to be modified
slightly depending on model variants.
– Remove front centre console cover ⇒ page 59 .
– Remove centre console front storage compartment
⇒ page 63 .
– Remove footwell covers on left and right ⇒ page 31 .
– If fitted, unclip ashtray insert in bottom centre trim of storage
compartment.
– Unscrew bolts -1- from centre console -2-.
– Remove centre console -2- from beneath dash panel.
Installing
Install in reverse order of removal, observing the following:
Specified torques
♦ ⇒ “3.1 Assembly overview - centre console”, page 58
3.6 Removing and installing cup holder
Removing
– Remove centre console storage compartment ⇒ page 63 .
– Remove centre console insert ⇒ page 62 .
– Unscrew bolts -1-.
– Press catches -1-.
– Pull cup holder in -direction of arrow A- out of centre console.
Installing
Install in reverse order of removal, observing the following:
Specified torques
♦ ⇒ “3.1 Assembly overview - centre console”, page 58
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
3. Centre console 65