Removing
– Remove front trim of individual seat in 2nd row.
– Remove rear trim of individual seat in 2nd row.
– Remove left trim of individual seat in 2nd row.
– Unscrew bolt -4-.
– Remove belt guide -3- from seat frame.
– Gently pull seat belt out of belt guide.
– Unscrew bolt -2-.
– Detach belt end fitting -1- from seat.
Installing
Install in reverse order of removal, observing the following:
Specified torques
Component Specified torque
Bolts -4- for belt guide 3 Nm
Bolts -2- for belt end fitting 40 Nm
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
1. Seat belts 125