– Remove seat attachment rails -3- ⇒ page 99 .
– Remove cover -2- from all seat rails.
– Pull out floor covering -4- from beneath rear lock carrier cover.
– Remove floor covering -4- backwards out of vehicle.
Installing
Installation is carried out in reverse order.
5.7.4 Removing and installing floor covering, Transporter, passenger compart‐
ment, wood-type floor covering
Removing
– Remove rear floor covering -3- ⇒ page 243 .
– Remove rear sill panel mouldings ⇒ page 224 .
– Remove fastening rings ⇒ page 270 .
– Detach front floor covering -1- upwards from butyl adhesive
sealing cord - AKL 450 005 05- -2-.
– Remove front floor covering -1- towards rear from vehicle.
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
5. Interior trims 249
To Next Page
Loading...
Need help?
General