Removing
– Pull backrest adjuster handle -5- backwards.
– Using a small screwdriver, release clip -3- to remove.
– Pull backrest adjuster handle off lever -4-.
– Unscrew bolts -2- (Qty. 3) and remove trim -1- from seat.
Installing
Install in reverse order of removal, observing the following:
Specified torques
Component Specified torque
Trim 3 Nm
3.6.2 Removing and installing front seat frame
trim
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
3. Rear seats 385