– Roll cover -1- off padding -2- until the tensioning wires -4- of
the cover are accessible.
– Detach tensioning wires -4- of cover at all mounting points
from wire frame in padding -3-.
– Detach cover and padding from seat frame.
Installing
– Installation is carried out in reverse order.
2.2.8 Separating cover and padding, Trans‐
porter, backrest cover of individual seat,
2nd row
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
2. Rear seat covers and padding 501