Wacker Neuson 28Z3 User Manual

5-4 OM 28Z3 US – Edition 2.0 * * 28Z3b510.fm
Maintenance
Diesel fuel specification
Use only high-grade fuels
Bleeding the fuel system
Warning!
Fire and burn hazard. Draining fuel may ignite if it comes into contact with hot
engine parts or the exhaust system. Hot fuel may cause burns.
• Stop the engine before draining fuel.
• Always wear protective equipment and safety glasses when working
with fuel.
• Never bleed the fuel system if the engine is hot.
Bleed the fuel system in the following cases:
• After removing and reinstalling the fuel filter, prefilter or the fuel lines.
• After running the fuel tank empty.
• After running the engine again, after it has been out of service for a longer period of
time.
☞ Bleed the fuel system as follows:
• Fill the fuel tank.
• Turn the starting key to the first position.
• Wait about 5 minutes while the fuel system bleeds itself automatically.
• Start the engine.
If the engine runs smoothly for a while and then stops, or if it does not run smoothly:.
• Stop the engine.
• Bleed the fuel system again as described above.
• Have this checked by a qualified technician if necessary.
Grade Use
• 2-D ASTM D975 – 94
USA
• 1-D ASTM D975 – 94
• EN 590 : 96
EU
• ISO 8217 DMX
International
• BS 2869 – A1
England
• BS 2869 – A2

Wacker Neuson 28Z3 Specifications

General

Brand	Wacker Neuson
Model	28Z3
Category	Excavators
Language	English