OM 28Z3 US – Edition 2.0 * 28Z3b330.fm 3-21
Operation
3.6 Stopping and parking the machine
Important!
Possibility of inadvertent machine movement. To avoid unintentional movement of
the machine once it has been parked:
• Park the machine on level, stable ground.
• Place stop chocks at the ends of the rubber track.
Stop the machine ☞ Lower the bucket and the stabilizer blade to the ground.
☞ Reduce engine speed to low idle setting.
☞ Switch off starter.
☞ Fold up the control lever base.
NOTICE
Possible engine damage due to overheating.
• Never stop the engine under full load.
• Except in case of emergency, always make sure the engine can cool
down before it is stopped.
• Let the engine run at idling speed with no load for at least 5 minutes
before you stop it.
Important!
Secure the machine against unauthorized operation.
• Lock the cab.
• Fold up the control lever.
• Remove starter key.
To Next Page
Loading...
Need help?
General
