1-4 OM 28Z3 US – Edition 2.0 * * 28Z3b110.fm
Introduction
1.4 Fields of application, attachments
The attachments installed determine the intended use of this machine.
NOTICE
In order to avoid damage to the machine, only the attachments listed below
have been certified for installation on the machine.
• Contact your Wacker Neuson dealer if you wish to use other attachments.
Caution!
Personal injury or equipment damage hazards. Using other manufactures’
attachments, or attachments not designed for this excavator, can greatly
reduce the machine’s stability and output. Unapproved attachments may
damage the machine or injure the operator or those in the surrounding area.
• Only use attachments that have been approved by Wacker Neuson.
Consult your Wacker Neuson dealer for assistance.
Always compare the weight of the tool and its maximum payload with the indications in the
lift capacity table. Never exceed the maximum payload stated in the lift capacity table.
Use: attachment
Possible attachments
Description of attachment
Capacity Item no.: Excavator
Remarks
Complete quickhitch - 1000018479 28Z3
Required for operation of Wacker Neu-
son quickhitch systems
Bucket B = 300 mm (11.8’’)
50 l (1.8 ft
3
)
1000093755 28Z3
50 l (1.8 ft
3
)
1000017130 28Z3 For quickhitch
Bucket B = 400 mm (1’4’’)
69 l (2.4 ft
3
)
1000093756 28Z3
69 l (2.4 ft
3
)
1000017125 28Z3 For quickhitch
Bucket B = 500 mm (1’8’’)
88 l (3.1 ft
3
)
1000093757 28Z3
88 l (3.1 ft
3
)
1000017127 28Z3 For quickhitch
Bucket B = 600 mm (2’)
107 l (3.8 ft
3
)
1000093758
28Z3
107 l (3.8 ft
3
)
1000017134
28Z3 For quickhitch
Bucket B = 700 mm (2’4’’)
127 l (4.5 ft
3
)
1000093759 28Z3
127 l (4.5 ft
3
)
1000017128 28Z3 For quickhitch
Offset bucket B = 1000 mm (3’4’’) short stick
111 l (3.9 ft
3
)
1000096567 28Z3
111 l (3.9 ft
3
)
1000017131 28Z3 For quickhitch