Maintenance
Drive
118
BA RD24_RD28 en us 06
4.04 Drive
4.04.01 Checking drive lever
Function test 1. Switch off diesel engine and remove ignition key.
2. Move the drive lever [501] forward and back completely. The drive
lever must allow even movement in both directions without using
excessive force.
NOTE
No machine operation is permitted if the drive lever binds or is
sluggish. Call the customer service!
4.04.02 Checking the roller drum scraper
General Only correctly adjusted scrapers ensure a clean roller drum surface.
Check the condition of the scrapers. Replace worn scrapers in good time.
Folding scraper
The scraper must be changed if it is worn to the extent that dirt adhering
to the drum is no longer removed when the machine is laying asphalt.
To Next Page
Loading...
Need help?
General
