Foreword
Noise and vibration requirements
22
BA RD24_RD28 en us 06
1.06 Noise and vibration requirements
The sound emission of the machine was measured according to the CE
Sound Emission Directive in the version 2000/14/EC.
The sound and vibration indications on the driver's seat correspond to the
requirements of the CE Machinery Directive in the version 2006/42/EC.
Sound power level Sound indication of the machine
The guaranteed sound power level is specified in the technical data (see
page 133 et seq.).
Sound intensity level Sound indication on operator panel
The sound pressure level at the driver's seat is specified in the technical
data (see page 133 et seq.) (measurement uncertainty in accordance
with EN ISO 11201).
NOTE
However, when working in the immediate vicinity of the
machine, values may exceed 85 dB(A). In this case please
always wear your personal noise protection (ear protection).
Vibration indication on the
operator panel
Whole body vibration
The rms values of the acceleration (which have been assessed
according to EN 1032) with whole body vibrations on the driver's seat of
a
w
= 0.5 m/s² are not exceeded.
Hand arm vibrations
The rms values of the acceleration (which have been assessed according
to EN 1032) with hand arm vibrations of a
hw
= 2.5 m/s² are not exceeded.
To Next Page
Loading...
Need help?
General
