Tables
Technical data
BA RD24_RD28 en us 06
131
Winter operation with diesel fuel
NOTE
No admixture of petroleum and no addition of flow additives is admissible.
With lower ambient temperatures paraffin precipitations may result in congestions of the fuel system and,
thus, in malfunctions.
■
Below an ambient temperature of 0 °C (32 °F) it is necessary to use winter diesel fuel
(up down -20 °C (-4 °F)) (gas stations provide them early enough prior to winter time).
■
For arctic climate zones up to -44 °C (-47 °F) it is possible to use special diesel fuels.
5.00.06 Overview of lubricant details
Lubricant Quality Viscosity Identification
Engine oil
The oil quality must correspond to the
API / ACEA classification.
API: CG-4
or higher
ACEA: E5-02
or higher
See chart
Hydraulic oil (mineral oil)
The viscosity is determined in accor-
dance with DIN standard 3448 (ISO-VG:
viscosity grade).
HVLP
Hydraulic oil (biological hydraulic oil)
Synthetic, saturated ester
(ISO-VG: viscosity grade).
HEES
Conditions
ISO VG 22 arctic
ISO VG 32 winter
ISO VG 46 summer
ISO VG 68 tropical
ISO VG 100 extreme heat
Special oil
Only Wacker Neuson special oil is admissible.
Gear box oil with Limited-Slip-Additions.
The oil quality must correspond to the
API classification.
API GL-5 SAE 85W-90
Coolant for diesel engine, liquid-cooled (free of nitrite, amine and phosphate).
Mixture: 40 % coolant concentrate, 60 % water.
Lubricating grease
Lithium soaped multipurpose grease with high-pressure additives.
Temperature application range from -25 °C (-13 °F) to +120 °C (248 °F).
5.00.07 Starting torques
The starting torques indicated within the tables apply to nuts according to DIN 934 and screws with
headrest according to DIN 931 (frictional coefficient μ
total
= 0.12) unless otherwise specified.
NOTE
Check screws and nuts regularly for tight seat, if necessary, retighten.
To Next Page
Loading...
Need help?
General
