Operation
Instruments and operating elements
BA RD24_RD28 en us 06
55
3 OPERATION
3.00 Instruments and operating elements
NOTE
The instruments and operating elements are arranged in this
section in ascending order according to their number. These
numbers in squared brackets are used as a reference in the
description of the elements.
000-05
NOTE
Please observe chapter 6, too. Here you find the description,
operator control and maintenance of auxiliary equipment.
000-64
3.00.01 Indicators, displays
Electrical system When switching on the electrical system with the switch [310] all pilot
lights and indicators are activated for approx. 2 seconds to check the
functionality. Check whether all elements are operable. You find further
explanations in the section Operational monitoring (see page 82 sqq.).
101
Operating hour meter
After the electrical system is switched on, the operating hours of the
machine are shown in the display field. Maintenance work has to be
carried out according to the accumulated operating hours.
NOTE
The current software status is shown in the first 2 seconds.
118
Diagnostic code
During operation, faults in the machine are indicated by flashing indicator
lights. A number code in the display denotes the specific fault. Table for
diagnostic codes see page 133 et seq.
NOTE
After switching on the electric system, an internal test code is
displayed for 2 seconds.
To Next Page
Loading...
Need help?
General
