Maintenance
General maintenance instructions
98
BA RD24_RD28 en us 06
Maintenance of the tyre mounting
1. Checking wheel nuts / wheel bolts for tightness.
4.00.04 Important information about maintenance work
General Specialist knowledge is necessary for the execution of some inspection
and maintenance works; these cannot be given in the scope of these
operating instructions. We recommend to have these works performed by
trained specialised staff.
Safety The following safety instructions apply for all maintenance works.
WARNING
Unintentional movement!
Unexpected movement during maintenance work can lead to serious
injuries or death.
■
Carry out maintenance work only when the engine is stopped.
■
Put machine on a safe surface (even, capable of bearing,
horizontal).
■
Keep away from batters.
■
Secure machine against rolling away.
002-37
WARNING
Inadmissable engine start!
Risk of injury due to starting engine during maintenance works.
■
Prior to maintenance works fasten a warning label on the operator
platform.
■
Remove the earthing strip from the battery strip before starting
maintenance work.
002-68
WARNING
Uncovered, rotating parts!
Risk of injury due to rotating parts.
■
Only open the engine hood or engine room doors when the engine
is at a standstill.
002-09
WARNING
Hot surface, hot fluids!
Risk of burns due to hot surfaces and fluids.
■
Prior to maintenance works, allow machine to cool down to a
temperature under 30 °C (86 °F) .
■
Do not touch hot machine parts.
■
Check filling levels only when machine is cooled down.
002-10
To Next Page
Loading...
Need help?
General
