Assembly Instructions and Auxiliary Devices
ROPS roll-over bar
BA RD24_RD28 en us 06
149
6 ASSEMBLY INSTRUCTIONS AND AUXILIARY
DEVICES
NOTE
When working at the machine please always adhere to the
instructions given in your Safety instructions!
000-01
NOTE
Please also consider the parts included in the scope of supply.
They may be different from the parts list content indicated here
due to further developments in the product.
000-23
6.00 ROPS roll-over bar
17553
NO!
OK!
M16
MA 280 Nm
M16
MA 60 Nm
General The ROPS roll-over bar is a safety device in the case the machine tilts
or rolls over. It avoids that the driver is crushed to death based on the
high self-weight of the machine. In case the ROPS roll-over bar was
dismounted (from the machine) due to transport or repair reasons, the
ROPS roll-over bar needs to be remounted according to instructions prior
to operating the machine again.
To Next Page
Loading...
Need help?
General
