Foreword
Type plate
BA RD24_RD28 en us 06
19
1.05 Type plate
NOTE
For machines without EC Conformity, neither an EC
Declaration of Conformity nor a CE type plate can be issued.
This is the case if, for example, the machine does not have a
drum drive, drum brake or roll-over (ROPS) protection.
000-45
The entire marking represents an official document and must not be
altered or effaced.
NOTE
Please state the vehicle identification number (VIN) and the
type of your machine for every spare part order.
Machine type plate The type plate is fixed to the machine frame (see page 39).
NOTE
The VIN [E] indicates the type series and the serial number of
the machine e.g. WNCxxxxxxxxxxxxxx.
The maximum operating weight [J] is the static weight of the
machine including:
■
Working substances and lubricants
■
100 % fuel tank contents x 0.84 specific weight
■
100 % water & additive tank contents
■
75 kg for the driver
■
the static weight of all options or auxiliary devices at the
same time and approved by the manufacturer (e.g., chip
spreader).
No additional ballasting is allowed.
To Next Page
Loading...
Need help?
General
