Maintenance
General maintenance instructions
BA RD24_RD28 en us 06
95
4 MAINTENANCE
NOTE
When working at the machine please always adhere to the
instructions given in your Safety instructions!
000-01
NOTE
Please observe chapter 6, too. Here you find the description,
operator control and maintenance of auxiliary equipment.
000-64
4.00 General maintenance instructions
This machine requires care and maintenance like any other technical
device. The extent and the frequency of the maintenance work depends
essentially on the operating and deployment conditions, which may differ
in many cases. In case of more difficult operating conditions, the machine
must have maintenance in shorter intervals as scheduled for normal
operation.
The maintenance intervals are determined according to the running time
of the operating hours counter; for this, additional maintenance work has
to be performed during the running-in time according to the running-in
regulations. The works necessary for care and the conservation of the
operational safety of the machine are listed in the following sections.
The running-in regulations, the servicing intervals and the care measures
for the diesel engine can be found in the instruction manual of the engine
manufacturer and must be observed.
4.00.01 Operation monitoring
Air filter The operability of the air filter cartridge and the safety cartridge is
monitored by an electric contamination indicator. Only if the pilot light
[203] flashes, must the air filter cartridge or the safety filter cartridge be
replaced.
To Next Page
Loading...
Need help?
General
