Operation
Prior to machine start
72
BA RD24_RD28 en us 06
Control stand Safety belt
[A] Safety belt
NOTE
The driver must wear a safety belt while driving machines with
a ROPS cab or a ROPS roll-over bar.
000-37
If the machine is provided with a safety belt, this belt needs to be
inspected for wear or damage before starting the engine. If damaged,
replace the belt promptly. When closing the belt, make certain to apply it
tightly across the hip (not across the belly). Do not twist the belt. Replace
the safety belt every 3 years. Belts are strained by accidents and need to
be replaced immediately when an accident has occurred.
Seat adjustment
WARNING
Uncontrolled movements!
Risk of injury due to uncontrolled movements when changing the seat
pedestal position.
■
Operate the machine only in an admissable seat position.
■
Only drive the machine with latched seat pedestal.
■
Do not adjust the seat pedestal during driving.
■
Adjust the seat pedestal only on an even surface.
002-41
To Next Page
Loading...
Need help?
General
