Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
8-24
8. Setups
Auto Power Saver
In power saving mode, there is a "low-power mode" and a "sleep
mode," and when the set time has elapsed, these modes are
switched to in the following way, thus reducing the power
consumption.
Last operation on the machine
J Low-power mode J Sleep mode
1. From the Machine Clock/Timers screen, select Auto Power
Saver, and select Change Settings.
2. Set low-power mode and sleep mode.
• From Last Selection to Low Power Mode: Set the time to
go from last operation to low-power mode. Set the time
from 1 to 240 minutes, in 1 minute increments.
NOTE: Set the time From Last Operation to Low-power
Mode not to exceed the time From Last Operation to Sleep
Mode.
• From Last Selection to Sleep mode: Set the time to go
from last operation to sleep mode from 1 to 240 minutes, in
1 minute increments.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English