Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
5-9
5. Using the Scan Service
Configuration of the scanner (Save to a Mailbox)
Overview
This section describes the configuration procedure to use the
scanner (save to a mailbox) function on the machine.
The following is the procedure to use the scanner (save to a
mailbox) function:
• Enabling the port and setting TCP/IP
First enable the Salutation port, then set the IP address.
• Registering a Mailbox
Register a mailbox for storing the scanned data.
Enabling the ports and setting the IP addresses
Enable the port (Salutation) for the scanner (save to a mailbox)
and then set the IP address. The procedure for setting the
machine is as follows.
NOTE 1:The configuration can also be performed using
CentreWare Internet Services.
NOTE 2:Enable the SOAP port and the SNMP port in most cases.
Refer to “Using CentreWare Internet Services” on page 3-1.
1. Display the System Administrator Menu screen.
a. Press the Log In/Out button.
b. Enter the UserID using the numeric keypad and then
select Confirm.
NOTE:The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
c. Select System Settings.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English