Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
9-1
9. Troubleshooting
SMB
This section describes the troubleshooting, notes and restrictions
when using SMB.
Troubleshooting
The possible causes, check points, and remedies for problems
when using SMB are as follows:
When you cannot communicate with the printer
Cause Check point Remedy
The computer and the machine
are using different protocols.
From Windows Start, Search and
while searching for other
computers, Windows cannot find
Network Computer or the 4110
copier/printer.
Configure the machine and each
computer to use the same SMB
operational protocol.
The machine and the computers
belong to different networks
(subnets).
From Windows Start, Search and
while searching for other
computers, Windows cannot find
Network Computer or the 4110
copier/printer.
When the machine and the
computers are on different
networks, consult your network
administrator.
The host name for the machine is
already in use.
Print out the Printer Settings List
to confirm if “Duplicate Host
Name” is printed in the SMB status
information.
Use the CentreWare Internet
Services to change the host name
to a unique name, or initialize the
machine settings to the default
settings.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English