Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
8-63
8. Setups
Use the following procedure to access the Other Settings feature.
1. From the Common Settings screen, select Other Settings.
2. Select the item to be set or changed, and select Change
Settings.
NOTE: Select S to display the previous screen and select T
to display the next screen.
3. Select the default setting.
4. Select Save; you are returned to the Other Settings screen.
5. Repeat Steps 1-4 for the selecting the default setting for any
additional desired Other Settings items.
6. Select Close to return to the Common Settings screen.
7. Select Close to return to the System Settings screen.
Auto Job Promotion
This Other Settings option allows you set the machine to
automatically promote a job for printing/copying if the machine is
unable to start a prior job. For example, the machine is unable to
start an operation because there is no paper in the tray (at the
start of a copy or print operation). If this feature is enabled, then
the machine can bypass the current job and allows other jobs to
start.
KEY POINT: The other jobs must not have the same copy/print
requirements as the faulted job. If other jobs have different copy/
print requirements, then these other jobs can be promoted and
copied/printed.
NOTE: Stored documents such as secure prints and sample prints
are excluded and cannot be automatically promoted.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English