Loading Paper
Xerox
®
B205 Multifunction Printer
User Guide
157
2. To accommodate longer paper, press the paper tray
extender lever (1) and slide the lever to the desired
position. Press and slide the paper length guide (2) until
it lightly touches the end of the paper stack.
3. Position the width guide by pressing the lever and sliding
it towards the stack of paper, until it gently touches the
side of the stack.
4. Insert the paper tray into the printer.
5. After loading paper, if prompted, verify the paper size
and type settings on the screen. To keep the same
settings, press OK. To change the settings, press the
down arrow, then press OK and adjust the settings:
• To select a paper size, press the up/down arrows to
select Paper Size, then press OK. Press the up/down
arrows to select the paper size you want, then press
OK.
• To select a paper type, press the up/down arrows to select Paper Type, then press OK. Press
the up/down arrows to select the paper type you want, then press OK.
6. When printing from your computer, ensure you select the Paper option in the print driver to
specify the correct paper size and type. Not confirming the paper details may result in printing
delays. For information about setting the paper type and size on the control panel, refer to Setting
Paper Size and Type.
Note: The settings made from the print driver on your computer override the settings on the
control panel.
Using the Manual Feed Slot
The manual feed slot is located on the front of your printer. It can be closed when not in use, making
the product more compact. Use the manual feed slot to print transparencies, labels, envelopes, or
postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the
paper tray.
When using the manual feed slot for special media it may be necessary to use the rear cover for the
output. For further information, refer to Media Output Locations.
1
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
