6-9
Phaser 3635MFP
GP 4
General Procedures and Information
Draft 4
GP 4 System Administration Tools
Purpose
To describe the system administration tools that are available.
Procedure
Perform the following:
1. Press the Log In/Out key.
2. Enter the customers password (default is 1111). Touch the Enter button on the UI.
3. Select the Tools tab, refer to Table 1.
NOTE: The Machine Information, Faults and Service Information tabs are accessible
without entering System Administration Tools. Go to GP 3 Machine Status.
Table 1 Diagnostic menu
1st Level 2nd Level 3rd Level 4th Level 5th Level 6th Level
Device Settings General Energy Saver 5 to 120 Minutes - -
- - Set Date & Time mm/dd/yy / dd/mm/yy / yy/mm/
dd
--
- - - Month / Day / Year - -
- - GMT Offset -12 to 14.0 Hours - -
- - Language Default US English / Italian / Danish /
Greek / Polish / French / Dutch
/ Swedish / Russian / Hungar-
ian / German / Portuguese /
Finnish / Turkish / Romanian /
Spanish / Brazilian Portuguese
/ Norwegian / Czech / Catalan
--
- - Xerox Customer Support Customer Support Telephone
Number / Supplies Telephone
Number / Customer Asset TAG
Number / Xerox Asset TAG
Number
--
- - System Administration Reports Machine Configuration / SMTP
Log / LDAP Log / Connectivity
Log / Network Authentication
Log
--
- - - Do not Print Configuration
Report At Power On / Print
Configuration Report At Power
On
--
- - Altitude Adjustment Enable / Disable - -
- - Contention Management Priority / First In, First Out - -
Paper Tray Manage-
ment
Paper Setting Default Stock Stock Type Plain Paper / Lightweight / Cotton / Colored
/ Pre-printed / Recycled / Transparency /
Labels / Card Stock / Bond / Archive / Enve-
lopes / Heavyweight / Custom 1 / Custom 2/
Custom 3 / Custom 4 / Custom 5 / Custom
6 / Custom 7 / Other
-