Xerox PHASER 3635 Service Manual

4-15
Phaser 3635MFP
REP 5.4
Repairs and Adjustments
Draft 4
REP 5.4 DADF Transport Assembly and DADF Feed
Assembly
Parts List on PL 5.30 and PL 5.35
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
1. Remove the DADF, PL 5.10 Item 1.
2. Remove the DADF rear cover, PL 5.10 Item 9.
3. Remove the DADF door assembly, PL 5.10 Item 3.
4. Remove the DADF lift solenoid, REP 5.2.
5. Disconnect the following connectors from the DADF PWB:
• CN1
• CN5
• CN7
• CN8
• CN9
6. Remove the DADF transport and feed assemblies, Figure 1.
NOTE: The DADF transport and feed assemblies are removed as a unit.
Figure 1 Transport and feed assemblies removal
7. If required, separate the DADF feed assembly from the DADF transport assembly, Figure
2.
1
Remove 2 screws
at the rear.
2
Remove 3 screws
at the front.
4
R
emove 1 screw beneath the DADF.
5
Lift the DADF feed and
transport assemblies out
of the DADF lower cover
assembly.

Xerox PHASER 3635 Specifications

General

Brand	Xerox
Model	PHASER 3635
Category	All in One Printer
Language	English