6-30
Phaser 3635MFP
GP 17, GP 18
Draft 4
General Procedures and Information
GP 17 Restriction of Hazardous Substances (RoHS)
Purpose
To give information on the RoHS Directive.
The RoHS Directive restricts the use of certain hazardous substances in electrical and elec-
tronic equipment. It applies to equipment placed in the European Union (EU) market. The
directive takes effect from 1st July 2006.
NOTE: Currently these restrictions are only for the European Union (EU) market and some
associated countries. For more information go to www.Xerox.com.
The hazardous substances are:
• Lead (Pb)
• Mercury (Hg)
• Cadmium (Cd)
• Hexavalent Chromium (Cr 6+, Cr [VI])
• Polybrominated Diphenyl Ethers (PBDE’s)
• Polybrominated Biphenyls (PBB’s)
Identification of a RoHS Compliant Machine
Xerox will maintain a central list of RoHS compliant machines.
This general procedure is for information only. All Phaser 3635MFP machines are RoHS com-
pliant.
GP 18 Scan Edge
Use this procedure to test the document edge detection routine.
Procedure
NOTE: Before performing the scan edge print, ensure the DADF is lowered.
Perform the following:
1. Enter diagnostics, GP 1.
2. Select Diagnostic Routines.
3. Select Other Routines.
4. Select Scan Edge.
5. Select Print. The scan edge print will be printed.
6. If the following co-ordinates are displayed, the scan edge print is good:
Valid Image [ 0: 96] [ 0: 108]
Scan Image [ 0: 384] [ 0: 432]
To Next Page
Loading...
Need help?
General
