Xerox PHASER 3635 Service Manual

6-37
Phaser 3635MFP
dC132
General Procedures and Information
Draft 4
NVM Initialization - Network
Purpose
To reset the network settings to default.
Procedure
1. Enter diagnostics, GP 1.
2. Select Diagnostic Routines.
3. Select Network Routines, 132 NVM Initialization - Network, then All Network NVM.
4. Follow the screen instructions to reset the network settings.
5. Switch off the machine, then switch on the machine.
NVM Initialization - Fax Card
Purpose
To return the fax card NVM settings to default. Refer to dC131.
Procedure
1. Enter diagnostics, GP 1.
2. Select Diagnostic Routines.
3. Select Fax dC Routines, then 132 NVM initialisation.
4. Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to Table 2, for the functions that are reset to default.
• Kill All
• All Fax Directories
• Fax Job NVM
• Fax Configuration NVM
• Fax SA/KO Settings NVM
5. Switch off the machine, then switch on the machine.
NVM JBA Database Y Y
NVM JBA Config Y Y
NVM Auditron Config Y Y
NVM HFSI Counter N N N N
Table 2 Fax NVM
Fax file type Category Kill All
All Fax
Directories
Fax
Job
NVM
Fax
Configuration
NVM
Fax SA/KO
Settings
NVM
Dial Directories Y Y
Group Directories Y Y
Junk Directories Y Y
Logo Directories Y Y
Table 1 Copier NVM
Copier file type Category
All Copier
NVM
Machine
Variable NVM
SA/KO Dust
Off
System
Counters
Dust Off
Mailbox Directories Y Y
Poll Directories Y Y
Job Sets Y Y
Jobs Y Y
Image Y Y
Bitmaps Y Y
Job ID Y Y
Mailbox Y Y
Alarm Y Y
Fax Protocol Trace Y Y
Protocol Records Y Y
Container Versions Y
FAX NVM Configuration Y
Fax NVM SA/KO Settings Y
Table 2 Fax NVM
Fax file type Category Kill All
All Fax
Directories
Fax
Job
NVM
Fax
Configuration
NVM
Fax SA/KO
Settings
NVM

Xerox PHASER 3635 Specifications

General

Brand	Xerox
Model	PHASER 3635
Category	All in One Printer
Language	English