Xerox Phaser 6120 Service Manual

Print Engine Theory of Operation
Phaser® 6120 Color Laser Printer Service Manual
7-19
Developing System
■ The machine employs the single-component, non-contact developing system.
■ In the non-contact, single-component developing system, the magnetic brush does not rub
the surface of the Photo Conductor (or the image). This prevents a foggy image from
occurring and the Photo Conductor from being worn.
.
Toner Cartridge Rack (Carousel)
■ The Toner Cartridge Rack is mounted with four Toner Cartridges. The rack employs a
rotary system.
■ Development of the image of each color of toner is performed by rotating the Toner
Cartridge Rack.
.
4139to2063e1
Developing Roller
Photo Conductor
Y Toner
Cartridge
K Toner
Cartridge
C Toner
Cartridge
M Toner
Cartridge
4139to2064e0
4139to1528c0

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm