Xerox Phaser 7400 Service Manual

A-26 Phaser 7400 Color Printer Service Manual
No Paper Average: 1=nnV, 2=nnV,
3=nnV, CHK=nnV
Paper Average: 1=nnV, 2=nnV,
3=nnH, CHK=nnV
<Press Down for more data>
Measured averages without and
with media present in sensor. No-
Paper Average = 3.33V
<Press Help(?) to toggle display>
<Press Back or Cancel to exit>
Corr. Sens. = n.n mV/um
<Press Back or Cancel to exit>
The corrected sensitivity after
calibration (in mVolts/microns).
NVRAM Access - This menu lets you read, set or reset selected NVRAM address locations.
NVRAM Reset Resetting NVRAM
Are you sure?
Ye s
No
Exiting Service Diagnostics
Restores the printers setup values
to their factory defaults. For more
information on resetting NVRAM,
see
"Postscript NVRAM Reset" on
page 6-9.
CRU Counter
Read
Total Pages = nnn
Fuser pages = nnn
Trans.Belt Images = nnn
<Press Down for more data>
IUs: Y = nnn images
M = nnn images
C = nnn images
K = nnn images
<Press Down for more data>
Toner: Y = nnn % used
M = nnn % used
C = nnn % used
K = nnn % used
<Press Down to repeat data>
CRU Counter Resets: Resets the selected Customer Replaceable Consumable count on the
engine. This resets the image count only, not the pixel count.
Reset Toner
Counts
Reset Black Toner Count
Resetting Toner Count
Reset Yellow Toner Count
Resetting Toner Count
Reset Magenta Toner Count
Resetting Toner Count
Reset Cyan Toner Count
Resetting Toner Count
No Reset
Service Diagnostics Tests and Utilities (Continued)
Menu Item Front Panel Display Results Functional Definition

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm