102
Windows XP/2000 (USB Printing)
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been
performed:
1. Ensure the USB print kit has been fitted to the machine. Print a configuration report to check this.
Print a Configuration Report
At the Machine
i. Press the [Machine Status] button.
ii. Touch [Print Reports].
iii. Touch [Configuration Report], touch [Print Selected Report], then touch [Close].
On the Configuration Report, under Device Profile, USB Printer Port should read Installed and the
USB Printer Port Settings: USB Port Enabled should read Enabled.
For instructions on how to enable the USB port click the Physical Connection link to the left of this
page, followed by USB.
2. Locate the CentreWare Print and Fax Drivers CD. (This was delivered in the CentreWare Network
Services Pack with your machine.) Review any README file contained with the printer drivers.
3. A standard USB peripheral cable.
4. A workstation or laptop that supports USB connectivity.
To Next Page
Loading...
Need help?
General
