36
Auxiliary (Foreign Device) Interface Kit
A third party access and accounting device such as a coin operated device or a card reader can be
attached to the machine. To enable this option the Foreign Device Interface Kit must be installed. After the
kit is installed the administrator must enable Auxiliary Access as the Accounting Mode from the Tools
menu of the machine.
The menu path to follow at the machine is:
1. Press the Log In / Out button.
2. Log into the machine as admin, with a default password of 1111.
3. From Tools, press the Accounting button.
4. Press Accounting Mode.
5. Press Auxiliary Access and select available buttons to configure your device.
For further instructions on Auxiliary (Foreign Device) Interface Setup options refer to the Training and
Information CD2 delivered with your machine.
To Next Page
Loading...
Need help?
General
