11
The Welcome Page and Install Wizards
An Installation Wizard displays the first time the machine is powered on, providing the ability to set the date
and time.
Simultaneously, a Welcome Page is enabled as the opening page of the machine's Internet Services web
pages. You can click Configure Device on this Welcome Page, or click the Configuration Overview link on
the Properties tab, to go directly to the Install Wizards for configuring protocols and optional services.
A Cloning File... button on the Welcome Page lets you copy configuration settings from a compatible Xerox
system and apply them to this system.
To stop showing the Internet Services Welcome Page, check the Don't Show... box on the Welcome Page.
Note: To access the Welcome Page or Properties tab of Internet Services, TCP/IP and HTTP must be
enabled on the device as described in the Read Me of this guide. To review the Read Me, click
Introduction, then Read Me, on the left hand side of this page.
Network Connectivity
The machine can be connected to the network via 10/100BaseT Ethernet cable.
To Next Page
Loading...
Need help?
General
