Print WorkCentre
®
XXXX
342 User Guide
Menu at the bottom of the Tabs
Using Saved Print Settings using the PCL Print Driver
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Use this option when you to want to select your saved print settings.
1. Open the document to be printed. From most applications select the Office button or select
File, then select Print from the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Select the Xerox PCL driver from the list of print drivers available.
4. Open the print driver Properties window - the method will vary depending on the application
you are printing from. From most Microsoft applications select the Properties or Preferences
button to open the window.
5. Select the Saved Settings option required.
• Driver Defaults sets the printing properties to the default settings.
• Earth Smart Printing sets the printing properties to environmentally friendly settings.
• Any custom settings you have saved will be listed underneath the Earth Smart Printing
option.
• Save As saves the current printer settings as custom settings.
• Save As *Application Name* Default saves the current settings and makes them the
default settings for the named application. This option is useful if, for example, you always
want to print Word documents 2-sided but Excel spreadsheets 1-sided.
• Rename makes it possible to change the name for the custom print settings you have
currently selected. This is not available if the driver or application default print settings are
selected.
• Delete permanently erases the custom print settings you currently have selected. This is
not available if the driver default print settings are selected.
6. Click the option you require.
7. Click the OK button to save your settings.
8. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
9. Collect your job from the device.
10. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
11. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the Release button.
To Next Page
Loading...
Need help?
General
