Getting Started WorkCentre
®
XXXX
72 User Guide
To enhance productivity your System Administrator can change the default settings for many of the
features to the settings most commonly used in your work group. For example, your System
Administrator could increase the default darkness of copies if you regularly copy lightly marked
documents such as pencil drawings.
Refer to the System Administrator Guide for further information.
More Information
Viewing the Progress and Details of a Job using the Job Status Menu
Using Internet Services to find System Administrator Contact Details
System Administrator Guide www.xerox.com/support.
Maintenance and Consumables
Identifying the Replaceable Units
There are several consumables on the device that need replenishing or replacing, such as paper,
staples, and customer replaceable units.
1. Toner Cartridge
2. Print Cartridge
The device will display a message on the touch screen when any of the units need to be re-ordered.
This message is a warning that the unit is nearing the end of its life. Only replace the unit when a
message actually instructs you to do so.
WARNING: When replacing consumables do NOT remove the covers or guards that are fas-
tened with screws. You cannot maintain or service any of the parts that are behind these cov-
ers and guards. Do NOT attempt any maintenance procedure that is NOT specifically
described in the documentation supplied with your device.
To Next Page
Loading...
Need help?
General
