Xilinx 7 Series User Manual

140 www.xilinx.com 7 Series FPGAs GTP Transceivers User Guide
UG482 (v1.9) December 19, 2016
Chapter 4: Receiver
Table 4-10: RX Equalizer Attributes
Attribute Type Description
ADAPT_CFG0 20-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
RX_LPM_HOLD_DURING_EIDLE 1-bit Binary When set to 1'b1, all adapted values
for the LPM and offset cancellation
are held when the GTP transceiver
RX is in electrical idle and restored
after electrical idle is exited.
RXLPMRESET_TIME 7-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
RXLPM_CFG 1-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
RXLPM_CFG1 4-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
RXLPM_HF_CFG2 4-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
RXLPM_HF_CFG 14-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
RXLPM_BIAS_STARTUP_DISABLE 1-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
RXLPM_LF_CFG 18-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
Send Feedback

Xilinx 7 Series Specifications

General

Brand	Xilinx
Model	7 Series
Category	Computer Hardware
Language	English