- 3 -
The problems that may arise during the use of the product are basically listed in the safety precautions, and all are
indicated by the two levels of attention and danger. For other unmentioned matters, please follow the basic
electrical operation rules.
When used incorrectly, there may be danger, moderate injury or minor injury, and
property loss.
When used incorrectly, it may cause danger, personal casualties or serious injuries,
as well as serious property losses.
Attention to Product Confirmation
1．Do not install damaged drives, drives that lack spare parts, or drives whose models do not meet the
requirements.
1. Before installing wiring, be sure to disconnect the power supply to prevent electric shock.
2. It is forbidden to expose the product to water, corrosive gases, flammable gases and other
substances, causing electric shock and fire hazards.
3. Do not touch the conductive part of the product directly, which may cause misoperation and
malfunction.
1. Please connect AC power to LN or L1/L2/L3 or R/S/T on the dedicated power terminal of the
driver. Do not connect the output terminals U, V, W of the driver to the three-phase power supply.
2. Please connect the ground wire correctly. Poor grounding may cause electric shock. Please use
2mm
2
wire to ground the ground terminal of the driver.
3. Please lock the fixed screw of the terminal, otherwise it may cause fire.
4. Be sure to disconnect all external power supply before wiring the driver.
Before using this product, please read this part carefully and operate after fully understanding
the use, safety and precautions of the product. Please connect the product correctly on the
premise of paying great attention to safety.
Be sure to review this section carefully before use this product. In precondition of security, wire
the product correctly.
Safety Precautions
PrePrecaPrecautio
ns
To Next Page
Loading...
Need help?
General
