0 INTRODUCTION 0 INTRODUCTION
EF494T TM 06/2011 edition
1 Safety-alert Symbol
This is the safety-alert symbol. When you see
this symbol on your tractor or in this manual,
personal injury is possible or even likely if you
do not follow the advice given. Read the
messages that follow carefully.
2 Signal Words
The signal words "DANGER" "WARNING"
"CAUTION" are used with the safety-alert
symbol.
(1) "DANGER" indicates the extreme hazard
that would result in high probability of
irreparable injury if proper precautions are
not taken.
(2) "WARNING" indicates the hazard that
would result in injury if proper precautions
are not taken.
(3) "CAUTION" indicates the general
precautions.
3 Service Instructions
(1) This stop symbol indicates an important
message about proper operation or
service. When you see this symbol, read
the message that follows carefully.
(2) NOTE describes precautions to take while
working.
4 Measurements
This tractor is based on metric measurements.
All hardware is therefore metric (ISO). Make
sure to use the specified metric hardware when
service is necessary.
5 Direction
The right and left sides of the tractor are
determined by facing in the same direction as
the tractor moves when going forward.
To Next Page
Loading...
Need help?
General
